4. Press Start. The result can be seen from Result column.
5. Follow the DVB-H troubleshooting flowchart.
DVB-H RF test measurement
Radiated DVB-H RF test measurement with Willtek 4403 universal coupler
Setup: PC/Phoenix + Willtek 4403 universal coupler + signal generator + battery cover attached
1. Setup the connection as shown in the figure below.
Page 6 –6
Table 13 Pass/Fail Failure codes
Self test failed.
No connection to DVB-H Module.
Another test is ongoing.
Copyright © 2008 Nokia. All rights reserved.
Replace DVB-H Module.
Restart the phone and run the
self test again.