Page of 234
Download Table of ContentsContents Print This PagePrint Bookmark

Nokia N96 Service Manual: User Interface; Display Features

Hide thumbs
Also See for N96
User manual - 396 pages
Service manual - 22 pages
User manual - 66 pages
RM-247
System Module
3.5mm
Signal name
Pin #
6
PLUGDET
5
HS EAR L
4
HS EAR R
3
HS MIC
1, 2
HS GND
There are three different use cases for AV connection. In all cases the PLUG_DET is used for detecting plug
insertion and removal. EAR lines are used for FM antenna reception.
• Headset or similar with ECI or without ECI.
When a headset is detected the terminal will check if there is ECI circuit in the accessory. If the ECI chip is
present, tuning values for that is taken into use otherwise basic audio tuning parameters are used.
• Headphones
For the headphones and any 3-pole connector devices, the headphones option is used.
Note:
The mic line and the ground line are connected together.
• Video out
For example, when connecting terminal to television all pins are used.
Note:
The microphone is multiplexed to C-video. The cable has to be inserted first to television set
and then to the terminal, otherwise the automatic detection does not work according to the
specification.

User interface

Display
Display features
• Module size (width x height x thickness) 47.48 mm X 67.14 mm X 2.041 mm
• Resolution QVGA (240*320)
• Numbers of colours up to 16.7M
• Partial display function; power saving by pausing display process on part of the screen
Issue 1
Table 18 Pin configuration
Direction
In
In / Out
In / Out
In / Out
-
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Description
Terminal internal connection, plug
detection
Audio output
Audio output,
Multiplexed microphone audio and
control data, C-video out
Ground contacts
Page 7 –29

Advertising

   Also See for Nokia N96

This manual also for:

L3, L4

Comments to this Manuals

Symbols: 0
Latest comments: