RM-247
TV troubleshooting
Figure 39 DVB-H RF test measurement setup
2. Make sure connection between PC and phone is alive. Control phone via USB and change operation mode
to LOCAL.
3. Set the frequency in the signal generator to 639 MHz.
4. Set the output level (amplitude) of the signal generator to -30 dBm.
5. Set the frequency in the RX Testing field in Phoenix to 637 MHz (test window shown in figure below).
6. Press the start button.
Issue 1
COMPANY CONFIDENTIAL
Page 6 –7
Copyright © 2008 Nokia. All rights reserved.