RM-247
RF troubleshooting
Conducted WLAN troubleshooting
Troubleshooting flow
WLAN front-end test
Steps
1.
Connect the MJ-131 test jig's FBUS connector to a computer with a DAU-9S cable. Alternatively, if you are
using FPS-8, use an XCS-4 modular cable and a USB cable.
Note:
Make sure that you have a PKD-1 dongle connected to the computer parallel port.
Issue 1
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Page 4 –23