Mitsubishi Electric FR-F500 Series Instruction Manual page 34

• Computer - inverter connection cable
For a connection cable between the computer having RS-232C and the inverter (RS-232C ↔ RS-485
converter), refer to the table below.
Examples of commercially available products (as of July, '02)
Type
FA-T-RS40"*
* You can not connect multiple inverters with a converter cable (a computer and an inverter are one-to-one
connection). As the RS-232C cable and the RS-483 cable (10BASE-T+RJ-45 connector) are provided
with a product, no need to prepare a cable and a connector separately. Contact a maker for details of the
product.
REMARKS
When fabricating the cable on the user side, see below.
Examples of commercially available products (as of July, '02)
Product
1) 10BASE-T cable
2) RJ-45 connector
(2)Connection of a computer to multiple inverters (one-to-n connection)
RS-485
interface
terminal
RS-232C
cable
REMARKS
When fabricating the cable on the user side, see below.
Examples of commercially available products (as of July, '02)
Product
1) 10BASE-T cable
2) RJ-45 connector
* Do not use No. 2 and No. 8 pin (P5S) of the 10 BASE-T cable.
Mitsubishi Electric Engineering Co., Ltd
Type
SGLPEV-T 0.5mm × 4P
* Do not use No.2 and No.8 pin (P5S).
5-554720-3
Station 1
Computer
Inverter
RS-485
connector
Distributor
10BASE-T cable 1)
Computer
Station 1
Inverter
RS-232C
connector
RS-485
connector
Maximum
15m
Converter
Distributor
10BASE-T cable
Type
SGLPEV-T 0.5mm × 4P *
5-554720-3
INSTALLATION AND WIRING
Maker
Station 2
Inverter
RS-485
connector
RJ-45 connector 2)
Station 2
Inverter
RS-485
connector
RJ-45 connector 2)
1)
23
Maker
Mitsubishi Cable Industries, Ltd.
Tyco Electronics Corporation
Station n (up to 32)
Inverter
RS-485
connector
Terminating
resistor
Station n
Inverter
RS-485
connector
Terminating
resistor
Maker
Mitsubishi Cable Industries, Ltd.
Tyco Electronics Corporation