System-Time Dst Predefined - TP-Link TL-SG3210 Cli Reference Manual

Example
Configure the system time mode as NTP, the time zone is UTC-12:00, the
primary NTP server is 133.100.9.2 and the secondary NTP server is
139.78.100.163, the fetching-rate is 11 hours:
TL-SG3424(config)# system-time ntp UTC-12:00 133.100.9.2 139.79.100.163
11

system-time dst predefined

Description
The system-time dst predefined command is used to select a predefined DST
configuration and the configuration can be recycled.
Syntax
system-time dst predefined [ USA | Australia | Europe | New-Zealand ]
Parameter
USA | Australia | Europe | New-Zealand —— Predefined DST mode, with four
options: USA, Australia, Europe and New-Zealand. By default, the setting is
"Europe".
The DST time periods which the four predefined DST mode represents are
displayed as follow:
USA: Second Sunday in March, 02:00 ~ First Sunday in November, 02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00.
New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April, 03:00.
Command Mode
Global Configuration Mode
Example
Configure the DST period of the switch as Europe:
TL-SG3424(config)# system-time dst predefined Europe
116