Ipv6 Mld Snooping Member-Aging-Time; Ipv6 Mld Snooping Report-Suppression - TP-Link TL-SG3210 Cli Reference Manual
Jetstream l2 managed switch
Hide thumbs
Also See for TL-SG3210:
- User manual (292 pages) ,
- Cli reference manual (199 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Example
Specify MLD Snooping router port aging time as 100 seconds globally:
TL-SG3424(config)# ipv6 mld snooping router-aging-time 100
ipv6 mld snooping member-aging-time
Description
The ipv6 mld snooping member-aging-time command is used to specify
member port aging time globally. The default aging time is 260 seconds. To
restore
member-aging-time command.
Syntax
ipv6 mld snooping member-aging-time timer
no ipv6 mld snooping member-aging-time
Parameter
timer —— Specify the aging time in seconds, ranging from 200 to 1000.
Command Mode
Global Configuration Mode
Example
Specify MLD Snooping member port aging time as 100 seconds globally:
TL-SG3424(config)# ipv6 mld snooping member-aging-time 100
ipv6 mld snooping report-suppression
Description
The ipv6 mld snooping report-suppression command is used to enable the
Report message suppression function. By default, it is enabled. To disable this
function, please use no ipv6 mld snooping report-suppression command.
Syntax
ipv6 mld snooping report-suppression
no ipv6 mld snooping report-suppression
Command Mode
Global Configuration Mode
Example
Disable Report message suppression function:
TL-SG3424(config)# no ipv6 mld snooping report-suppression
the
default
timer,
220
no
ipv6
please
use
mld
snooping
Hide quick links:
Advertisement
Table of Contents
