Show Interface Description; Show Interface Flowcontrol - TP-Link TL-SG3210 Cli Reference Manual

show interface description

Description
The show interface description command is used to display the description of
all ports or an Ethernet port.
Syntax
show interface [ gigabitEthernet port ] description
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the description of all Ethernet ports:
TL-SG3424(config)# show interface description
Display the description of port 2:
TL-SG3424(config)# show interface gigabitEthernet 1/0/2 description

show interface flowcontrol

Description
The show interface flowcontrol command is used to display the flow-control
information of an Ethernet port.
Syntax
show interface [ gigabitEthernet port ] flowcontrol
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the flow-control information of all Ethernet ports:
TL-SG3424# show interface flowcontrol
Display the flow-control information of port 2:
TL-SG3424# show interface gigabitEthernet 1/0/2 flowcontrol
145