Warning List - Epson Stylus Photo RX700 Service Manual

EPSON Stylus Photo RX700

3.1.5 Warning List

Causes
Displayed when the guide was open when printing started.
CDR/DVD guide open
(at standalone printing)
Displayed when the guide was closed when printing started.
CDR/DVD guide closed
(at standalone CD Label printing)
Indicates the I/C waste liquid counter comes near end. This message is
Waste liquid near end
displayed only when power is turned on.
The replacement time of the elastomer tube is near. This message is
Elastomer tube replacement
displayed only when power is turned on.
While XHTML-Print data could be decoded, a part or all of the reference
object had a MIME encode error and could not be obtained. The following
two problems are considered depending on the type of the un-obtained
A part of the reference object is
reference object.
broken (BT-MIME).
• For an image, an area where that image is to be printed becomes blank.
• For a CSS (style sheet) file, the background color, basic character size
or the like cannot be specified as intended at the send side.
While XHTML-Print data could be decoded, a part of all of reference
A part of the reference object cannot
object decoding was abandoned due to memory shortage or excess of the
be buffered (BT-MIME).
max. number of objects to be handled.
XHTML-Print document cannot be XHMLT-Print document cannot be decoded due to a MIME encode error,
decoded (BT-MIME). or XHML-Print is not contained.
Unsupported media is inserted. Unformatted or unrecognizable media was inserted.
BT File size error
BT designation error
BT structure error
During extended copy
During extended copy
P.I.F. list print P.I.F. data does not exist.
Memory card print No image is contained in the memory card.
Card insertion Recognition of the memory card failed.
External device installment An unsupported device has been installed.
Troubleshooting
Table 3-2. Warning List
Details
The guide for CD/DVD print is opened. Close the guide.
The guide for CD/DVD print is closed. Open the guide and press
start button.
Service required. Parts inside your printer are at near end of their
service life. See your printer's documentation for details.
Service required. Parts inside your printer are at near end of their
service life. See your printer's documentation for details.
Error in the data stream, the document cannot be printed very well.
Error in the data stream, the document cannot be printed very well.
Error in the data stream, the document cannot be printed.
Cannot recognize the memory card or disk.
The document is too large to print with Bluetooth.
The document is too complex to print with Bluetooth.
Error in the data stream, the document cannot be printed.
The B&W button cannot be used. Press the Color button.
The Color button cannot be used. Press the B&W button.
P.I.F. data cannot be found.
Memory card or disk was not inserted or cannot be recognized.
Cannot recognize the memory card or disk.
Cannot recognize the device.
Overview
Displayed Message (TBD)
Revision A
Release Conditions
The guide has been stored. Or, a
specified time has elapsed.
The guide has been opened. Or, a
specified time has elapsed.
EEPROM has been initialized or
replaced. Displayed for a specified
time (approx. 7 seconds).
EEPROM has been initialized or
replaced. Displayed for a specified
time (approx. 7 seconds).
Press any key.
Press any key.
Press any key.
Remove the card. Press the OK
button to delete the message.
Press any key.
Press any key.
Press any key.
Press "Color" key.
Press "B&W" key.
Displayed for a specified time
(approx. 3 seconds).
Displayed for a specified time
(approx. 3 seconds).
Displayed for a specified time
(approx. 3 seconds).
Displayed for a specified time
(approx. 3 seconds).
57