Pitney Bowes DM100i Quick Install Manual page 3

For best results, we strongly encourage you to follow the steps in this guide in
sequential order.
Step 1 Remove Shipping Tape
You must remove your existing postage funds
first, if you have an existing meter that is being
replaced. Refer to other "return" or "Transfer"
documents provided.
Open the top cover of the meter and remove
any packing material, protective foam, or tape
that may be present. Close the cover.
Step 2 Select a Connection Method
and Setup Your Meter
You must connect to the Pitney Bowes Data Center to add postage funds,
download software updates, and perform USPS required inspections.
If you have Internet access, we recommend you install the PC Meter
Connect™ Desktop Application online at www.pb.com/support/pcmc. This
software provides the quickest data transfers.
DM100i and DM200L - Download and install the latest PC Meter
Connect Desktop Application from www.pb.com/support/pcmc.
After you have installed the PC Meter Connect Desktop Application,
you must return to this Guide and complete the meter setup starting
at Step 5. The PC onscreen directions will direct you to do so.
DM125 and DM225 - Download and install the latest PC Meter
Connect Desktop Application from www.pb.com/support/pcmc.
After you have installed the PC Meter Connect Desktop Application,
follow the PC onscreen instructions which guide you through the
complete system setup. You need not refer to this Guide again.
You can identify your model from the label on the front of your meter shown
in Step 1.
If you do not have Internet access, or choose not to use the PC Meter
Connect Desktop Application, simply continue with Step 3 in this Quick
Install Guide. You will not need to download the PC Meter Connect
Desktop Application.
DMXXX
Product Description
PXXX XXXXXXX
Product Code (PCN) Serial Number
Request Service Support, Order Supplies or
Check Postage Account Balance On-Line
www.pb.com or call
Select "My Account" 1-800-522-0020
1