Download Print this page


Scale (continued)
Position the assembled scale as shown. Now plug the connector on the
bottom of the base unit into the matching connector on your system.
A scale code is needed to calibrate the scale. If you have just attached
your scale, key in the correct scale code for your location. Codes for
each state can be found in the back of this guide on Page 19-20.
Select Continue.
The optional moistener allows you
to moisten, seal, and apply postage
to your envelopes all in one smooth
Position the moistener on the left
side of the deck as shown. Hold
down the blue release lever and
slide moistener from left to right,
with the lip of the moistener above
the deck.
DM100i / DM125
DM200L / DM225
Release Lever


This manual also for:

Dm200l, Dm225, Dm125

Comments to this Manuals

Symbols: 0
Latest comments: