Microprocessor
Figure 119. Thermal grease distribution
5. Use the thermal-grease syringe to place nine uniformly spaced dots of 0.02 mL
Figure 120. Syringe
Installing a memory module
The following notes describe the types of dual inline memory modules (DIMMs)
that the server supports and other information that you must consider when you
install DIMMs.
About this task
0.02 mL of thermal
grease
each on the top of the microprocessor.
Note: 0.01mL is one tick mark on the syringe. If the grease is properly applied,
approximately half (0.22 mL) of the grease will remain in the syringe.
Chapter 2. Installing optional devices
115