IBM x3650 M3 Installation And User Manual page 73

Figure 45. PCI riser-card assembly removal
4. Remove the PCI riser-card assembly that contains the adapter (see "Removing a
PCI riser-card assembly" on page 46).
5. Disconnect any cables from the adapter (make note of the cable routing, in case
you reinstall the adapter later).
6. Carefully grasp the adapter by its top edge or upper corners, and pull the
adapter from the PCI expansion slot.
Results
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 154.
PCI riser-card
assembly 2
PCI riser-card
assembly 1
Chapter 2. Installing optional devices
59