IBM x3650 M3 Installation And User Manual page 130

Figure 121. DIMM connectors location
v When you install or remove DIMMs, the server configuration information
v The server supports only industry-standard double-data-rate 3 (DDR3), 800,
116
System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide
changes. When you restart the server, the system displays a message that
indicates that the memory configuration has changed.
1066, or 1333 MHz, PC3-10600R-999, registered or unbuffered, synchronous
dynamic random-access memory (SDRAM) dual inline memory modules
(DIMMs) with error correcting code (ECC). See http://www.ibm.com/systems/
support/ for a list of supported memory modules for the server.
– The specifications of a DDR3 DIMM are on a label on the DIMM, in the
following format.
ggg eRxff-PC3-wwwwwm-aa-bb-cc
where:
- ggg is the total capacity of the DIMM (for example, 1GB, 2GB, or 4GB)
- e is the number of ranks
1 = single-rank
2 = dual-rank
4 = quad-rank
- ff is the device organization (bit width)
4 = x4 organization (4 DQ lines per SDRAM)
8 = x8 organization
16 = x16 organization
- wwwww is the DIMM bandwidth, in MBps