General Settings - Brother DCP-J562DW Online User's Manual

Home > Machine Settings

General Settings

• Set the Mode Timer
You can change the amount of time after the last Fax, Scan, Copy or Web operation before the machine returns to Ready
Mode. If you choose [Off], the machine stays in the mode you used last.
• Adjust the Machine Volume
• Change for Daylight Saving Time Manually
You can program the machine to change for daylight saving time.
• Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it
acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these
instructions to set a time delay to send the machine into Sleep Mode.
• Set the Machine to Power Off Automatically
The Auto Power Off feature can save power consumption. Set the amount of time that the machine will be in Sleep Mode
before it automatically powers off. When this feature is set to [Off], you must power off the machine manually.
• Set the Date & Time
• Adjust the LCD Backlight Brightness
If you are having difficulty reading the LCD, try changing the brightness setting.
• Change How Long the LCD Backlight Stays On
You can set how long the LCD backlight stays on after the last finger press.
• Set Your Station ID
Set the machine's Station ID if you want the date and time to appear on each fax you send.
• Set Tone or Pulse Dialling Mode
Your Brother machine is set for a Tone dialling service. If you have a Pulse dialling (rotary) service, you must change the
dialling mode.
• Reduce Printing Noise
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower.
• Change the Language Displayed on the LCD
Change the LCD language if needed.
• Change the Keyboard Setting
You can choose the type of keyboard for the LCD.
> Change Machine Settings from the Control Panel > General Settings
543