Change The General Settings From The Control Panel - Brother ADS-3100 Online User's Manual

Home > Machine Settings
Settings from the Control Panel

Change the General Settings from the Control Panel

Related Models: ADS-3300W
Purpose
Adjust the LCD Backlight Brightness
Change How Long the LCD Backlight
Stays On
Set the Home Screen
Set Sleep Mode Countdown
Set the Machine to Power Off
Automatically
> Change Machine Settings from the Control Panel
Operation
Settings > General Setup >
LCD Settings > Backlight
Settings > General Setup >
LCD Settings > Dim Timer
Settings > General Setup >
Screen Settings > Home Screen
Settings > General Setup >
Ecology > Sleep Time
Settings > General Setup >
Ecology > Auto Power Off
> Change the General
Description
Adjust the brightness of the LCD
backlight.
Set how long the LCD backlight stays
on.
Set the Home screen to Scan 1-3,
Shortcut 1-5, or Auto Start Scan.
When the machine is idle or you
press , the LCD will return to the
screen you have set.
Set how long the machine must be
idle before it goes into Sleep Mode
(5-90 minutes). The Sleep Mode
setting can reduce power
consumption. When the machine is in
Sleep Mode, it acts as though it is
turned off.
The timer will restart if any operation
is carried out on the machine.
The machine will not enter
Sleep Mode in the following
situations:
• A USB flash drive is
inserted into the machine.
• A machine error has
occurred.
Select how long the machine must
wait before it automatically turns itself
off after entering Sleep Mode. The
Auto Power Off feature can save
power consumption. When this
feature is set to Off, you must power
off the machine manually. To turn on
the machine after the Auto Power Off
feature has turned it Off, press
The timer will restart if you press any
buttons or touchscreen.
Auto Power Off will be
activated when all of these
conditions are met:
• Auto Power Off setting is
not set to Off.
• The machine has been in
Sleep Mode for more than
the preset period.
.
222