Brother DCP-J562DW Online User's Manual page 574

Level 1 Level 2
WLAN
WLAN Assistant -
Setup Wizard
WPS/AOSS
WPS w/PIN Code -
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
Web Connect Proxy Settings Proxy
Settings
WLAN Enable -
Network Reset -
Settings > [Print Reports]
Level 1
XMIT Verify
Address Book
Fax Journal
User Settings
Level 3
-
-
Status
Signal
SSID
Comm. Mode
-
-
-
-
-
Device Name
SSID
IP Address
Status
Signal
-
Connection
Address
Port
User Name
Password
-
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Descriptions
Configure your wireless network settings using the
Brother CD-ROM.
Configure your internal print server manually.
Configure your wireless network settings using the one-
button push method.
Configure your wireless network settings using WPS
with a PIN.
View the current wireless network status.
View the current wireless network signal strength.
View the current SSID.
View the current Communication Mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network settings using the
one-button push method.
Configure your Wi-Fi Direct network settings using
WPS with a PIN code.
Configure your Wi-Fi Direct network settings manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the LCD displays
Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD
always indicate a strong signal.
Turn the Wi-Fi Direct connection on or off.
Change the Web connection settings.
Turn wireless network connection On or Off.
Restore all network settings back to the factory
settings.
568