Brother DCP-J562DW Online User's Manual page 556

Home > Machine Settings
Date & Time
Set the Date & Time
(MFC models)
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to
each fax you send by setting your Station ID.
(DCP models)
If the machine's power has been off, the machine's date and time may not be current. Re-enter them.
>> MFC-J480DW
>> DCP-J562DW/MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Date & Time]. Press OK.
3. Enter the last two digits of the year using the dial pad, and then press OK.
4. Enter the two digits for the month using the dial pad, and then press OK.
5. Enter the two digits for the day using the dial pad, and then press OK.
6. Select [12h Clock] or [24h Clock], and then press OK.
7. To enter the time, do one of the following:
• If you selected [12h Clock], enter the time (in 12-hour format) using the dial pad, and then press OK.
Select [AM] or [PM], and then press OK.
• If you selected [24h Clock], enter the time (in 24-hour format) using the dial pad, and then press OK.
8. Press Stop/Exit.
DCP-J562DW/MFC-J680DW/MFC-J880DW
1. Press
[Settings].
2. Press
[Date & Time].
3. Press [Date].
4. Enter the last two digits of the year on the Touchscreen, and then press [OK].
5. Enter two digits for the month on the Touchscreen, and then press [OK].
6. Enter two digits for the day on the Touchscreen, and then press [OK].
7. Press [Clock Type].
8. Press [12h Clock] or [24h Clock].
9. Press [Time].
10. To enter the time, do one of the following:
• If you selected [12h Clock], enter the time (in 12-hour format) using the Touchscreen, and then press
[AM] or [PM].
Press [OK].
• If you selected [24h Clock], enter the time (in 24-hour format) using the Touchscreen.
Press [OK].
11. Press .
> Change Machine Settings from the Control Panel > General Settings > Set the
550