Brother DCP-J562DW Online User's Manual page 315

Home > Fax > Telephone Services and External Devices
Remote Codes > Change the Remote Codes
Change the Remote Codes
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
The preset Remote Activation Code is *51 (*91 for New Zealand). The preset Remote Deactivation Code is #51
(#91 for New Zealand). If you are always disconnected when accessing your External TAD remotely, try changing
the three-digit remote codes using the numbers 0-9, *, #.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Remote Codes]. Press OK.
d. Select [On]. Press OK.
To turn off the Remote Codes, select [Off]. Press OK.
3. Enter the new Remote Activation Code. Press OK.
4. Enter the new Remote Deactivation Code. Press OK.
5. Press Stop/Exit.
MFC-J680DW/MFC-J880DW
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Remote Codes].
2. Do one of the following:
• To change the Remote Activation Code, press [Act.Code]. Enter the new code, and then press [OK].
• To change the Remote Deactivation Code, press [Deact.Code]. Enter the new code, and then press
[OK].
• If you do not want to change the Codes, go to the next step.
• To turn the Remote Codes [Off] (or [On]), press [Remote Codes]. Press [Off] (or [On]).
3. Press .
Related Information
• Use the Remote Codes
> External and Extension Telephones > Use the
309