Brother DCP-J562DW Online User's Manual page 451

Error Message
Paper Size Mismatch
Tray not detected
Tray Removed
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Cause
The paper size setting does not match the
size of paper in the tray.
-OR-
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
The paper tray is not completely inserted. Slowly push the paper tray completely into
Paper or a foreign object has prevented
the paper tray from being inserted
properly.
This message is displayed when the
setting to confirm the paper type and size
is enabled.
The machine has a mechanical problem.
-OR-
A foreign object, such as a paper clip or a
piece of ripped paper, is in the machine.
The machine has a mechanical problem.
Action
See Related Information: Print a Fax
Stored in the Machine's Memory.
1. Check that the paper size you chose
on the machine's display matches the
size of the paper in the tray.
See Related Information: Change the
Paper Size and Paper Type.
2. Make sure you loaded the paper in a
Portrait position, by setting the paper
guides at the indicators for your paper
size.
See Related Information: Load Paper.
3. After you have checked the paper size
and the paper position, press Mono
Start or Colour Start.
If you are printing from your computer,
make sure the paper size you chose in
the printer driver matches the size of
paper in the tray.
See Related Information: Print Settings
®
(Windows ) or Print Options (Macintosh).
the machine.
Pull the paper tray out of the machine,
and remove the jammed paper or foreign
object. If you cannot find or remove the
jammed paper, see Related Information:
Printer Jam or Paper Jam.
To not display this confirmation message,
change the setting to Off.
See Related Information: Change the
Check Paper Size Setting.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine.
See Related Information: Paper is
Jammed Inside and in the Front of the
Machine (Jam A Inside/Front).
If the error message continues:
• Transfer your faxes to another fax
machine or your computer before
disconnecting the machine so you will
not lose any important messages.
Then, disconnect the machine from
the power for several minutes and
reconnect it.
See Related Information: Transfer
Your Faxes or Fax Journal Report.
• Transfer your faxes to another fax
machine or your computer before
disconnecting the machine so you will
not lose any important messages.
Then, disconnect the machine from
the power for several minutes and
reconnect it.
See Related Information: Transfer
Your Faxes or Fax Journal Report.
445