Brother DCP-J562DW Online User's Manual page 554

Hide thumbs Also See for DCP-J562DW:
Table of Contents

Advertisement

Home >
Machine Settings
Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or
a fax. Use these instructions to set a time delay to send the machine into Sleep Mode.
The timer will restart if any operation is carried out on the machine, such as receiving a fax or a print job.
The factory setting is five minutes.
When the machine goes into Sleep Mode, the LCD backlight turns off.
>> MFC-J480DW
>> DCP-J562DW/MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Sleep Mode]. Press OK.
c. Select [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]. Press OK.
3. Press Stop/Exit.
DCP-J562DW/MFC-J680DW/MFC-J880DW
1. Press
[Settings] > [All Settings] > [General Setup] > [Sleep Mode].
2. Press a or b to display the [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]
option, and then press the option you want.
3. Press
.
Related Information
General Settings
Set the Machine to Power Off Automatically
>
Change Machine Settings from the Control Panel
>
General Settings
> Set
548

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j680dwMfc-j480dwMfc-j880dw

Table of Contents