Scan To An Editable Text File Using Ocr - Brother DCP-J562DW Online User's Manual
Hide thumbs
Also See for DCP-J562DW:
- Online user's manual (633 pages) ,
- Basic user's manual (58 pages) ,
- Product safety manual (25 pages)
Table of Contents
Advertisement
Home >
Scan
>
Scan Using the Scan Button on Your Brother Machine
OCR
Scan to an Editable Text File Using OCR
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
Your machine can convert characters in a scanned document to text data using optical character recognition
(OCR) technology. You can edit this text using your preferred text-editing application.
•
(Macintosh) Presto! PageManager must be installed on your computer.
Download Presto! PageManager from
PM9SEInstaller_BR_multilang2.dmg.
The Scan to OCR feature is available for certain languages.
•
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to OCR] option, and then press OK.
4. If the machine is connected over the network, press a or b to select the computer where you want to send
data, and then press OK.
If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer,
and then press OK.
5. Do one of the following:
•
To change the settings, go to the next step.
•
To use the default settings, press Mono Start or Colour Start.
[Scan Type] depends on the default settings. Pressing Mono Start or Colour Start does not allow you to
change the settings.
6. Press a or b to select the [Scan Settings] option, and then press OK.
To use the [Scan Settings] option, a computer with the ControlCenter software installed must be
connected to the machine.
http://nj.newsoft.com.tw/download/brother/
> Scan to an Editable Text File Using
116
Advertisement
Table of Contents
