Home >
Network
> Additional Methods of Configuring Your Brother Machine for a Wireless Network
Additional Methods of Configuring Your Brother Machine for a Wireless
Network
To connect your machine to your wireless network, we recommend using the Installation CD-ROM.
•
Before Configuring Your Brother Machine for a Wireless Network
•
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup
™
(WPS) or AOSS
•
Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup
•
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
You must connect to a new SSID from your computer when it is configured for Ad-Hoc mode.
•
Configure Your Machine for a Wireless Network Settings When the SSID is Not Broadcast
•
®
Use Wi-Fi Direct
™
™
(WPS)
373