Brother DCP-J562DW Online User's Manual page 17

™
• If your Android
your device by touching it to the NFC logo on the control panel. You must download and install Brother
iPrint&Scan to your Android
• Make sure the NFC settings of both your Brother machine and your Android
2. 2.7"(67.5 mm) Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on this Touchscreen.
Adjust the angle of the Touchscreen LCD and Touchpanel by lifting it.
3. Touchpanel
(Back)
Press to go back to the previous menu.
(Home)
Press to return to the Home screen.
While the machine is in Sleep Mode, the Home icon blinks.
(Cancel)
Press to cancel an operation (available when illuminated in red).
4. Power On/Off
Press to turn the machine on.
Press and hold down
stay on for a few seconds before turning itself off. If you have connected an external telephone or TAD, it is
always available.
If you turn the machine off using
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.
Related Information
• Introduction to Your Brother Machine
• Print and Scan Using Near-Field Communication (NFC)
device supports the NFC feature, you can print from your device or scan documents to
™
device to use this feature.
to turn the machine off. The Touchscreen will display [Shutting Down] and will
, it will still clean the print head periodically to maintain print quality. To
™
device are set to On.
11