Extruder Module Installation; Accessory Installation - XYZ Printing DA VINCI MINI SERIES User Manual

Installing the
Extruder module
Installing the
Accessories
1. Install the guide tube
1
Make sure that the printer is
powered off. Place the extruder
module that the fitting pin is
secured the proper location.
1
Ensure that the guide
tube has been tightly
inserted into the port.
2
Insert the black ribbon
connector to complete
the installation.
2
Feed the guide tube
through the slot at the
top of the printer to
the extruder module.
NOTE: To unload the extruder module, first detach the
heating bus and press the black disengage button.
3
Ensure that the guide tube
is properly inserted into the
feed port of the extruder
module to complete the
installation.
- 4 -