Unpacking And Installation - XYZ Printing da Vinci Color mini User Manual

Unpacking and Installation

Unpacking
1. Remove the PP 2. Remove the packaging materials, accessory box and plastic cover.
belt.
3. Remove the tape on the body.
4. Open front door, remove all tape as shown in Illustration.
5. Remove the tape and
foam from the rear print
head installation position.
8. Remove the cable tie and foam in front and back of the front door.
6. Remove the foam on the ink service
station.
7. Remove the foam next to the
guide screws on both sides, and then
remove the foam under the print bed.
da Vinci Color mini
P5