Unpacking And Installation - XYZ Printing da Vinci Color User Manual

Unpacking and Installation

1
Move the printer to a table or plat-
form. (Do not move the printer by
yourself as it is heavy.)
3
Remove the packaging materials, top cover box, assessory box and plastic cover.
4
Remove the tape on the body (4 in
total).
6
Open the front door. Remove the
tape from the supporting aterials
and print bed.
8
Remove the foam next to the guide screws on both sides, and then remove the foam under the print bed.
2
Remove the plastic wrap and PP.
5
Open front door, remove the tape at mark printer door post
7
Remove the foam on the cartridge
holder.
P5