Jog Mode - XYZ Printing DA VINCI MINI SERIES User Manual

SetUp
3

1. Jog Mode

1. Jog Mode
2. Calibrate 3. Z-Offset 4. Others 5. Info
Manually adjust the movement of X/Y/Z Axis for printer main-
tenance.
First click on [Home Axes]. The printing device will be returned
to the initial axis position at the lower left corner of the printing
area. Then adjust the positions of the printing module (X-AXIS),
printing platform (Y-AXIS), and printing axes (Z-AXIS).
Select "X-AXIS" to move extruder rightwards and leftwards.
Select "Y-AXIS" to move print bed forwards and backwards.
Select "Z-AXIS" to move the print axis (Z-AXIS) upwards and
downwards.
The user may manually enter the adjustment value:
Range: 1 to 150; step: 1 mm
- 12 -