Disassembly/Reassembly Procedures; Overview - Epson L800 Service Manual

L800/L801

1.2 Disassembly/Reassembly Procedures

1.2.1 Overview

This section describes procedures for disassembling the parts/units in a
flowchart format. For some parts/units, detailed procedures or precautions are
provided (accordingly indicated by icons and cell's color). Refer to the
explanations in the example chart below and perform an appropriate
disassembling and reassembling procedure.
Parts/Components (p24)".)
The example below shows how to see the charts on the following pages.
Table 1-2. Explanatory Note
Item
White-letter Parts/units supplied as an ASP
Parts/unit
name
Black-letter Parts/units not supplied as an ASP
Indicates a practice or condition that could result
in injury or loss of life if not strictly observed.
Indicates a practice or condition that could result
in damage to, or destruction of equipment if not
strictly observed.
Indicates the parts that are inevitably broken in
the disassembling procedure, and should be
replaced with a new one for reassembly.
Indicates the parts that may cause the ink spill
when they are removed.
Indicates necessary check items in the
disassembling/reassembling procedure.
Icon
Indicates supplementary explanation for
disassembly is given.
Indicates particular tasks to keep quality of the
units are required.
Indicates particular adjustment(s) is/are required.
Indicates lubrication is required.
Indicates the number of screws securing the
parts/units.
Indicates the points secured with other than a
screw such as a hook, rib, dowel or the like.
Disassembly/Reassembly
Downloaded from www.Manualslib.com
(See" 1.3 Removing Exterior
Description Reference
Indicates the reference
page in blue-letter
Indicates the reference
page in blue-letter
" 1.1.2 Checks and
Precautions before
Disassembling (p10)"
Indicates the reference
page in blue-letter
Indicates the reference
page in blue-letter
Indicates the reference
page in blue-letter
Chapter 2 " Adjustment
(p69)"
Chapter 3 "
Maintenance (p88)"
Disassembly/Reassembly Procedures
manuals search engine
Black letters indicate a
part/unit not supplied as
an ASP.
Shows the screw types
and the specified torque
in the "Screw type/torque
list".
White letters indicate a
part/unit supplied as an
ASP.
---
---
Indicates that the
disassembly procedure of
boxed parts is explained
all together and step by
step in the section shown
as reference page (A).
---
---
---
" 1.5.8 Ink System (p45)"
Main Board Unit
3
---
S7 S15
Ink Supply Tank
Tube Assy
---
---
(p 20)
Adapter
---
1
(p 18)
Reference page
Figure 1-14. Example Chart
Revision A
Reference page (A)
Front Paper
Guide Assy
2
1
S9 S15
17
Confidential