Epson L800 Service Manual page 27

L800/L801
2. Slide the Front Housing in the direction of the arrow and remove the Front
Housing from the Upper Housing.
Grooves
Front Housing
Figure 1-21. Removing the Front Housing
When installing the Upper Housing, be careful of the following:
̈
Do not pinch the cables.
̈
Tighten the screws in the order given in
̈
Match the ribs of the Upper Housing shown in
with the grooves of the Housing Lower.
̈
As shown in Fig.1-22, match the A part of the Front Housing
with the screw box of the Housing Lower.
Front Housing
Screw box of
Housing Lower
Disassembly/Reassembly
Downloaded from www.Manualslib.com
[Rear Side]
Ribs
Fig.1-20
A part of Front
Housing
Figure 1-22. Installing Upper Housing
manuals search engine
(p.25).
Fig.1-20 (p.25)
Housing Upper Assy
Revision A
26
Confidential