About This Manual; Manual Configuration; Symbols Used In This Manual - Epson L800 Service Manual

This manual, consists of the following chapters, is intended for repair service personnel and includes information necessary for properly performing maintenance
and servicing the product.

Manual Configuration

CHAPTER 1. DISASSEMBLY / REASSEMBLY
Describes the disassembly/reassembly procedures for main parts/units of
the product, and provides the standard operation time for servicing the
product.
CHAPTER 2. ADJUSTMENT
Describes the required adjustments for servicing the product.
CHAPTER 3. MAINTENANCE
Describes maintenance items and procedures for servicing the product.
CHAPTER 4. APPENDIX
Provides the following additional information for reference:
Power-On Sequence
Standard Operation Time for servicing the product
Troubleshooting
Downloaded from www.Manualslib.com

About This Manual

manuals search engine

Symbols Used in this Manual

Various symbols are used throughout this manual either to provide additional
information on a specific topic or to warn of possible danger present during a
procedure or an action. Pay attention to all symbols when they are used, and
always read explanation thoroughly and follow the instructions.
Indicates an operating or maintenance procedure, practice or
W A R N I N G
condition that, if not strictly observed, could result in serious
injury or loss of life.
Indicates an operating or maintenance procedure, practice, or
C A U T I O N
condition that, if not strictly observed, could result in bodily
injury, damage or malfunction of equipment.
May indicate an operating or maintenance procedure, practice or
C H E C K
condition that is necessary to accomplish a task efficiently. It may
P O I N T
also provide additional information that is related to a specific
subject, or comment on the results achieved through a previous
action.
For Chapter 1 "Disassembly/Reassembly", symbols other than indicated above
are used to show additional information for disassembly/reassembly. For the
details on those symbols, see " 1.2 Disassembly/Reassembly Procedures
(p17)".
Confidential