Safety Checks - Wacker Neuson DPU 7060SC Operator's Manual

Safety instruction
2.2.14 When traveling backwards the operator has to guide the vibration plate
2.2.15 Vibratory plates are to be guided such that hand injuries caused by
2.2.16 Vibratory plates have to be guided such that their stability is
2.2.17 Machines with integrated transport trolley may not be parked or stored
2.3

Safety checks

2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
SV00053GB
laterally by its guide handle so that he will not be squeezed between
the handle and a possible obstacle. Special care is required when work
ing on uneven ground or when compacting coarse material. Make sure
of a firm stand when operating the machine under such conditons.
solid objects are avoided.
guaranteed.
on the trolley. This device has only been designed to transport the
machine.
Vibratory plates may only be operated with all safety devices installed.
Before starting operation, the operator has to check that all control and
safety devices function properly.
If defects in the safety equipment or other defects are detected which
impair the safe operation of the internal vibrator, the supervisor is to be
notified without delay.
The machine must to be switched off immediately in case of defects
jeopardizing the operational safety of the equipment.
Process materials and operating fuels must be stowed away in
receptacles or containers marked according to the respective
manufacturers specifications.
6