Table of Contents
Advertisement
Installation Guide
2.14 Remote Panel Antenna Installation
When choosing an optimal deployment location, it may be necessary to mount a device so one of the antenna
panels may be obstructed. For example, traffic light poles can completely obscure one of the panels in the AP 7181
antenna array. The remote panel antenna kit can be used to address this use case.
In addition to the standard hardware, the following items are also required for installing a remote panel antenna:
• Antenna extension cables (6 or 10 feet)
• ADEPT panel remote mounting bracket
• Terminators for the horizontal (HP) and vertical (VP) antenna connections on the top of the unit.
NOTE
NOTE
The terminators for the AP 7181 are Ingress Protection 68 (IP68) rated. No additional
weatherproofing precautions are required.
In addition to the required tools, you will need a cordless drill and a 3.6 mm bit to drill
the hole for the set screw on the ADEPT panel remote mounting bracket.
41
Hide quick links:
Advertisement
Table of Contents
