Rf Exposure Guidelines; Safety Information; Remote And Standalone Antenna Configurations; Power Supply - Motorola AP-7131N-FGR Installation Manual

Access point

Hide thumbs Also See for AP-7131N-FGR:

Table of Contents

Regulatory Compliance

RF Exposure Guidelines

The device complies with Internationally recognized standards covering human exposure to electromagnetic fields from

radio devices.

Reducing RF Exposure—Use Properly

Only operate the device in accordance with the instructions supplied.

To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near

users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all

persons.

Use only a Motorola approved power supply output rated at 48Vdc and minimum 0.75A. The power supply shall be Listed

to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV outputs.

Use only a Motorola approved power supply. Use of alternative power supply will invalidate any approval given to this

device and may be dangerous.

Wireless Devices - Countries

Select only the country in which you are using the device. Any other selection will make the operation of this device illegal.

The use on UNII (Unlicensed National Information Infrastructure) Band 1 5150-5250 MHz is restricted to indoor use only, any

other use will make the operation of this device illegal.

The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.

Table of Contents

Show Quick Links

Table of Contents