Table of Contents
Advertisement
28
The pole mount adapter can be mounted to poles 3 inches to 15 inches in diameter and has a load rating of 75 lbs.
1. Attach the pole mount adapter (or other mounting bracket hardware) to the mounting asset and ensure
that the mounting bracket is level.
NOTE
2. Secure the gooseneck to the pole mount adapter using the 4 hex head bolts (3/8"x16"x1") included with
pole mount adapter (Part Number RLN6197A).
NOTE
3. Grasp the yoke and carefully remove the unit from the shipping carton.
4. Place the unit on a solid surface with the yoke facing up.
5. Remove the yoke and the allen socket head screws from the bottom of the access Point.
If using a bottom mount, drill a 1/2 inch diameter hole at the lowest point on the bend
to allow water to drain from the gooseneck.
It is recommended to apply a small tube of anti-seize lubricant to the threads of the
gooseneck to prevent corrosion and seizing. This will facilitate the mounting process
and assure easier disassembly if the unit needs to be serviced.
AP 7181 Access Point
Hide quick links:
Advertisement
Table of Contents
