Top Mount Installation - Motorola AP 7181 Installation Manual

34

2.13.2 Top Mount Installation

1. Grasp the yoke and carefully remove the unit from the shipping carton.
2. Place the unit on a solid surface with the yoke facing up.
3. Remove the yoke and the allen socket head screws from the bottom of the unit.
The pole mount adapter (Part Number RLN6197A) will accommodate a banding strap up to 1¼ inch width.
Banding straps and the banding tool are not included when ordering the pole mount adapter.
The pole mount adapter can be mounted to poles from 3 inches to 15 inches in diameter and has a load
rating of 75 lbs.
4. Attach the pole mount adapter (or other mounting bracket hardware) to the mounting asset and ensure
the mounting bracket is level.
AP 7181 Access Point