Table of Contents
Advertisement
36
7. Ensure the yoke and the mounting bracket are level.
8. Loosely attach the allen socket head screws to the top of the unit. Leave the screws loose enough to
attach the yoke.
WARNING!
9. Carefully lift the unit into position. Align the key slots for the yoke with the allen socket head screws and
slide the yoke to the final position.
CAUTION
10. Torque the allen socket head screws from 108.7 - 145.0 inch pounds (lbf-in).
An AP 7181 unit weighs 39 pounds. Use all appropriate cautions when lifting and
consider a two man lift when necessary.
Ensure that the allen socket hex screws are tight and in the locked position before
releasing the full weight of the unit.
AP 7181 Access Point
Hide quick links:
Advertisement
Table of Contents
