INSTALLATION
Vertical Installation
1
To use the AP in a vertical position, insert it into the supplied
base. Ensure that the antenna's location is on top, as it does not
allow the unit to nestle into the base. The AP's foot slides snugly
into the base to keep the unit stable.
2
Follow the installation procedures for connecting and configuring
the unit.
Wall Mount Installation
If you mount the AP on the wall, you must:
!
Locate the unit as specified by the local or national codes
governing residential or business communications services.
!
Follow all local standards for installing a network interface
unit/network interface device (NIU/NID).
If possible, mount the AP to concrete, masonry, a wooden stud, or
other very solid wall material. Use anchors if necessary; for example
if you must mount the unit on drywall. Mounting the unit on the wall
may decrease performance.
SECTION 2, INSTALLATION
SECTION 2
2-3