12. Verify the behavior of the access point LED light pipe. For more information, see
"
LED Indicator
13. Place the ceiling tile back in its frame and verify it is secure.
14. The access point is ready to configure. For information on basic access point device
configuration, see "
2.7 LED Indicator
An AP-6521 Series access point has a single LED activity indicator on the front of the unit.
The LED provides a status display indicating error conditions, transmission, and network activity for
the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio.
" on page 15.
Using the Initial Setup Wizard
Hardware Installation
" on page 17.
15