Table of Contents
Advertisement
SECTION 1
LED
Condition
1 Power
ON
Blinking
Blinking/ON
2 Wireless
OFF
ON
ON/Blinking
3 Device
OFF
ON/Blinking
ON/Blinking
1-10
LED Description
The underlined items represent network activity.
Color
Status
Green
The device is powered on and operating normally.
Green
Firmware update is in progress.
Red
The power LED turns RED as soon as the reset
button is depressed. If the reset button is held down
for more than 5 seconds, the LED starts to blink
during which the access point's default user name,
password and IP address will be restored. The LED
then turns OFF until the reset button is released. The
power LED keeps blinking RED if the firmware is
corrupted indicating the firmware needs to be
restored.
None
No mobile station or AP has associated with this
device.
Red
The wireless interface has been disabled by the
firmware.
Green
802.11b/802.11g connection exists in this wireless
domain/active traffic present.
None
No external Ethernet device has been attached and
detected. The Ethernet link is down.
Amber
10BaseT link detected/active traffic present.
Green
100BaseT link detected/active traffic present.
SECTION 1, OVERVIEW
OVERVIEW
Advertisement
Table of Contents
