Dtc (Ducati Traction Control) Setting Function - Ducati Diavel Carbon Owner's Manual

DTC (Ducati Traction Control) setting
function
This function allows you to customize the level of
DTC intervention (Ducati Traction Control) or disable
it for every riding mode.
To access the function it is necessary to view the
"setting" menu page 86; using button (1) or (2) select
the "RIDING MODE" function and press the reset
button (4) to go to next page.
Use button (1) or (2) to select the riding mode to be
changed and press the reset button (4).
To go to next page, use button (1) or (2) to select the
"DTC" indication and press the reset button (4) again
to confirm selection.
When accessing the function, the currently set DTC
level appears at the left-hand side of the display inside
a rectangle (e.g. DTC 1).
Use button (1) or (2) to select the new intervention
level (1 to 8) or OFF to disable the Traction Control;
after selecting the new setting, press the reset
button (4) to highlight "MEMORY" indication.
At this point, store the new setting by holding the
reset button (4) for 3 seconds with "MEMORY"
displayed.
If the setting has been stored successfully, the
display will show "MEMORIZED" in green for 2
seconds and the EXIT option will be highlighted
automatically.
To exit the setting function, press the reset button (4)
when "EXIT" is highlighted.
91