Check drive chain tension
Important
Have chain tension adjusted by a Ducati Dealer
or Authorized Service Center.
Turn the rear wheel until you find the position where
chain is tightest.
Set the vehicle on the side stand. Push down the
chain at the point of measurement and release.
Measure the distance between the "aperture" upper
profile and pin center.
The read distance must be: 0.35 - 0.43 in (9 - 11 mm).
Important
Se la catena di trasmissione è troppo tesa o
troppo lenta, registrarla in modo che la misura rientri
nei valori indicati.
218
0.35÷0.43 in (9÷11 mm)
Fig 166