Indicator "TRIP TIME" - Trip time
This function indicates vehicle trip time. The
calculation considers the time since Trip 1 was last
reset. When Trip 1 is reset, this value is reset as well.
The count active phase occurs when the engine is
running and the vehicle is stopped (the time is
automatically stopped when the vehicle is not moving
and the engine is off and restarts when the counting
active phase starts again).
When the reading exceeds 511:00 (511 hours and 00
minutes), the meter is reset and automatically starts
counting from 0 again.
Note
If you change the unit of measurement for an
item connected to "speed" (and distance) or
"consumption" using the "SET UNITS" Function of the
Setting menu, the trip time value will be automatically
reset.
162 HIGH
SPORT
3
TOT
10355
03 DTC
h
TRIP TIME
11:00
GEAR
Fig 27
53