Default Function (Resetting Ducati Default Parameters) - Ducati Diavel Carbon Owner's Manual

DEFAULT function (Resetting Ducati
default parameters)
This function resets the parameters set by Ducati for
each riding mode. To access the function it is
necessary to view the "setting" menu page 86; using
button (1) or (2) select the "RIDING MODE" function
and press the reset button (4) to go to next page. Use
button (1) or (2) to select the riding mode to be reset
to default (initial) parameters and press the button (4)
to access the next page. Now, using button (1) or (2)
select "DEFAULT" indication.
To restore original default parameters, press and hold
the reset button (4) for 3 seconds. For the parameter
reset, approx. 3 seconds are needed during which
"PLEASE WAIT..." will appear on the display; at the
end of the procedure, "DEFAULT OK" will appear on
the display to indicate that the parameters were
reset.
98
RIDING MODE
SPORT TOURING URBAN
4
4
EXIT
SPORT
DTC DEFAULT ENGINE
EXIT
4
PLEASE WAIT...
DEFAULT OK
SPORT
DTC DEFAULT ENGINE
EXIT
4
Fig 54