Background setting function for the
dashboard on tank - DASHBOARD 1
This function allows setting the "background" of the
instrument panel on tank.
To access the function it is necessary to view the
"setting" menu page 86; using button (1) or (2) select
the "BACK LIGHT" function and press the reset button
(4) to go to next page.
Use button (1) or (2) to select the "DASHBOARD 1"
function and confirm by pressing the reset button (4).
Once you enter the "DASHBOARD 1" function,
setting is highlighted on the display (DAY, NIGHT or
AUTO in green); use button (1) or (2) to shift the arrow
on the left onto the new setting and confirm by
pressing the reset button (4).
To exit the setting function, press the reset button (4)
when "EXIT" is highlighted.
"DAY" setting: instrument panel background
becomes permanently "white" to improve readout
view - recommended with bright exterior lighting.
"NIGHT" setting: instrument panel background
becomes permanently "black" for a more dimmed
visibility - recommended with poor exterior lighting
and/or dark.
102
"AUTO" setting: instrument panel background is set
automatically according to exterior lighting conditions
(detected by a sensor) and will be "black" for a more
dimmed visibility with poor exterior lighting and
"white" for an improved readout view with bright
exterior lighting.
Note
In the event of an interruption of the power
supply from the battery, when power is restored at
the next Key-On, the backlighting will always be set
by default to "AUTO" mode.