Quantum scalar i40 Quick Start Manual page 10

Scalar i40 and Scalar i80 Quick Start Guide
Figure 8 Setup Wizard –
Date/Time Screen
Figure 9 Changing the Date
and Time
10
The Setup Date/Time screen appears (see
4 Do one of the following:
• To accept the date and time, press the Accept button.
• To change the date or time, press the Change button. The Date field becomes
available to edit and the menu bar button designations change. Use the Left
and Right buttons to move through the date field, one segment at a time. Use
the Up and Down buttons to change each segment of the date value. You can
press the Up or Down button repeatedly to change the value, or you can hold
the button in for fast scrolling. As you press Right, each segment of the date
fills in. Continue to press the Right button to go to the Time field and edit it the
same way. See Figure
Right button designation changes to Apply. Press the Apply button. The new
date and time display, and you can Accept or Change. Once you press Accept,
you move to the next step.
Note: You cannot change the time zone on the operator panel. You can change it
later using the Web client.
Figure 8).
9. When you reach the last segment of the Time field, the
Turning the Library ON and Configuring Network Settings