Quantum scalar i40 Quick Start Manual page 12

Scalar i40 and Scalar i80 Quick Start Guide
Figure 12 Setup Wizard –
Current Configuration Screen
12
7 Do one of the following:
• To accept the settings and go to the next step, press Accept.
• To change the settings, press Change. You can only change the settings if you
have a new license key to enter. If you have a license key, press Add, then enter
the license key using the directional buttons as described in
and press Accept when complete. If you need to add another license key,
perform the Change operation again.
The Current Configuration screen appears, displaying the default number of
partitions, I/E station slots, and cleaning slots (see
8 Do one of the following:
• To accept the current settings, press Accept.
• To change any of the settings, press Change. This will delete the current
partitions, and you are asked to confirm you want to do this. If you agree, the
library deletes the partitions, which takes about 30 seconds. When the
partitions are deleted, you are guided through several more screens to change
the number of partitions, I/E station slots, and cleaning slots. Use the directional
buttons as described in
• Partitions — The minimum number of partitions you can create using the
operator panel is equal to the number of distinct combinations of tape drive
interface type (Fibre Channel or SAS) and media generation (LTO-4, LTO-5)
of the currently installed tape drives. The maximum number of partitions
you can create is equal to the number of tape drives installed in the library.
The library assigns resources proportionately among the partitions. You can
change resource allocation and configure partitions with more flexibility
later via the Web client. For details, see the
Guide
.
• I/E Station Slots — You can create a maximum of five I/E station slots on a
Scalar i40 and a maximum of ten on a Scalar i80. The minimum is zero. Be
aware that if you configure zero I/E station slots, you will not be able to
import and export tape cartridges.
• Cleaning Slots — You can configure a minimum of zero and a maximum of
four cleaning slots. For more information about cleaning slots, see the
Scalar i40 and Scalar i80 User's Guide
Figure
Step on page 10 and press Accept when complete.
Scalar i40 and Scalar i80 User's
.
Turning the Library ON and Configuring Network Settings
Step on page 10
12).