Accessing The Library Via The Web Client - Quantum scalar i40 Quick Start Manual

Hide thumbs Also See for scalar i40:

Table of Contents

Figure 13 Setup Wizard

Complete

Accessing the Library Via the Web Client

The Setup Wizard is complete (see

9 Press the Exit button.

It is recommended that you use the Web client to perform most library functions. The

Web client is easier to use than the operator panel, and it presents more information

and options than the operator panel does. Refer to the

Guide

or Web client online help for detailed instructions on how to use the Web client.

To access the library via the Web client:

1 From the operator panel, press the Reports button.

2 Press the Down button until Network Settings is highlighted.

3 Press the Select button.

4 Make note of your library's IP address that is displayed on the screen.

5 Enter the IP address in your Internet browser to bring up the library's Web client

6 Enter the default user name: admin

7 Enter the default password: password

8 Click OK.

Scalar i40 and Scalar i80

Figure

13).

Scalar i40 and Scalar i80 User's

Table of Contents

Scalar i80