Troubleshooting - LifeSpan TR1200i Owner's Manual

Maintenance and Tips

Troubleshooting

If you have a question that isn't answered in this Owner's Manual, visit our website
at www.LifeSpanFitness.com or call us at 877.654.3837 x4.
The treadmill is designed and manufactured to be reliable and easy-to-use.
However, if you have a problem, these troubleshooting steps may help you
find the cause.
Problem: The console does not turn on or function correctly.
Solution: Check to make sure the treadmill is properly plugged in, turn the
power switch down by the power cord off and back on again and make sure
the safety key is in place. Check all wire harness connections made during
assembly to be sure they are all properly connected. If the problem persists
contact LifeSpan Customer Service at www.LifeSpanFitness.com or call
877.654.3837 x4.
Problem: The Start button LED is dimly lit and no other lights are on.
Solution: The unit is in energy saving mode. Press and hold the Start button for
two seconds.
Problem: Speed does not match quick keys. Treadmill Starts at 1 and goes
to 16.
Solution: The treadmill is set up in Metric Mode. See chart on page 41 for
Configuration Steps.
Problem: The belt does not stay in the center of the treadmill when in use.
Solution: First check to make sure that the treadmill is level, then refer to the
instructions in this Owner's Manual on how to align the belt.
Problem: The treadmill belt slips during use.
Solution: The belt may need to be tensioned after a period of use. Refer to the
Belt Tensioning Section of this Owner's Manual.
Problem: Heart rate is erratic or not reading.
Solution: Make sure your hands are moist (Aloe Vera helps). Make sure all
connectors made during assembly, at the back of the console, are properly
connected and no wires are damaged. If wearing a chest strap, be sure the
batteries are good and that the electrodes are moist and positioned properly
on your chest.
48