LifeSpan TR1200i Owner's Manual page 45

Maintenance and Tips
Belt Lubrication
Use only 100% silicone and avoid using aerosol silicone sprays which include
additives and petroleum distillates. One ounce of silicone should be used for
each application. LifeSpan offers 100% silicone lubricant that can be ordered
at www.LifeSpanFitness.com.
The running belt comes pre-lubricated from the factory and should be
lubricated every 3 months (regardless of use) or 50 hours of use, whichever
comes first. Even if the treadmill is not being used, the silicone will dissipate
over time and the belt will dry out.
Apply the silicone to the underside of the treadmill belt. Do not apply to the
walking surface. This may be accomplished by folding the treadmill up and
applying the silicone to the inside portion of the running belt or by leaving
the treadmill in the normal use position and simply lifting the belt up over
the side rails and spraying the lubricant under the running belt onto the deck
surface. The silicone will absorb into the underside of the belt as you start
walking
NOTE: When lubricating the belt, make sure the treadmill is on a
surface that can be easily cleaned. After lubricating your treadmill
running belt, clean any excess silicone off the walking surface of the
belt and side rails.
.
For a full video demonstration on the lubing your treadmill go to the FAQ
section at www.LifeSpanFitness.com.
43